Cables weighing tons guided by quickly mounted igus energy chain Harnessed and tested e-loop energy supply system increases safety and reduces procurement and installation time
Innovative bearing solutions for higher power density, longer operating times, and lower carbon footprint Robust rotor and gear bearing solutions as an answer to increasing performance optimization. New opportunities for wind farm operators: cost-effective continued operation, thanks to a good 50 percent reduction in rotor bearing repair Schaeffler reduces the carbon footprint of roller bearings …
Innovative Bearing Solutions For Lower Carbon Footprint Read More »
Leading manufacturer of customised electrical switchboards implements automated data capture solution to consistently surpass their customers’ expectations
Simultaneous measurement of oxygen and carbon monoxide or methane concentrations for optimum combustion control in heating furnaces
The new i.Sense EC.W sensor allows cost-effective real-time condition monitoring for gliding e-chain systems
Thanks to its high accuracy, ABB’s flowmeter has met international standards approval and can now be used for key custody transfer transactions The CoriolisMaster’s smaller footprint, heightened communication abilities and remote verification capabilities ensure the precise measurements essential for custody transfer The new certification completes ABB’s fiscal metering offering providing unmatched precision to protect the …
Compact multi-axis system: Modular, flexible and integrated
Joining, measuring and process monitoring systems for industrial manufacturers
• The European Cement Association estimates that up to 95 percent of traditional fuels used in Cement production can be replaced with alternative fuels and raw materials (AFR) to help reduce emissions • The volatility created by a higher use of AFR brings an increased risk of explosions which in turn cause kiln stops raising …
Next generation probe increase safety and sustainability in kilns Read More »
No maintenance, no corrosion- the igus:bike sets new standards in sustainable mobility
Zero-emission means for APUS not only that pure water-vapor is the sole emission of the hydrogen fueled power train, but also that considerably noise reduction is achievable. To reach this ambitious goal, APUS has partnered with industry leaders like PowerCell (Hydrogen Fuel Cell), Fraunhofer (High-Voltage applications), COTESA (hydrogen storage solutions) HEGGEMANN (hydrogen supply and safety systems) and Rolls-Royce (aircraft propulsion). The APUS i-2 is a four-seater aircraft accommodating one pilot …
New logo and brand design support the continued growth path Dr. Wilhelm Kaenders (left) and Dr. Thomas Renner (right) present new TOPTICA logo and brand design at LASER World of Photonics 2022 in Munich. TOPTICA presents itself stronger than ever with a fresh new look. The brand design was launched for the first time …
Hioki recently released its new clamp-type current sensors: AC/DC current probes CT6841A, CT6843A, CT6844A, CT6845A, and CT6846A. The conventional clamp-type current sensors have the convenience of measuring current without having to disconnect the measuring cable.
Hioki launches CAN Units to enable central management of CAN signals and analog data.
In addition to the new DynaMAX name, systems will now begin with a 3 or 5 depending upon the performance, feature, or technology of a particular model.
Hypertherm, a U.S. based manufacturer of industrial cutting systems and software, recently announced the release of Production Manager, an optional module for its ProNest advanced CAD/CAM nesting software.
Easy to clean, lubrication-free and maintenance-free: the new drylin ZLW toothed belt axis is based on hygienic design principles and uses FDA-compliant materials.
Sensirion’s SCD42 miniaturised carbon dioxide (CO2) sensor is designed for products that fall under California’s Building Energy Efficiency Standards (Title 24), suitable for US HVAC applications, is now available worldwide through Sensirion’s distribution network.
ABB Unveils World’s First Electromagnetic Flowmeter With Bidirectional Connectivity To Power Intelligent Water Loss Management
ABB adds mobile connectivity to AquaMaster4 flowmeter, enabling 60 percent lower power consumption and identifying leaks ten times faster than the market standard in an industry where every drop counts.
ADLINK Releases Its First SMARC Module Based On Qualcomm QRB5165 Enabling High Performance Robots And Drones At Low Power
The Qualcomm QRB5165 processor, customised for robotics applications, is architected for running complex AI, deep learning workloads, and on-device edge inference efficiently while using lower power.
The lubrication-free bevel gears made of igus high-performance plastics transmit forces at a 90 degree angle. For example, they can undertake format adjustments in food technology.
The extremely quiet, efficient, oil-free pumps that reduces your CO2 footprint.
UR (Universal Robots) and robolink robots acquire a 5-times larger action radius thanks to a completely new solution.
INTEGRA’s automated liquid handling solutions can streamline routine pipetting tasks for more efficient and accelerated workflows.
The SoftAI system will address the most pressing challenge for the food industry, i.e. the inability to meaningfully automate operations.
The Quantron AG is launching its own QUANTRON vehicle, the electric QUANTRON 12 metre low-floor bus, at the end of this year.
igus: New Online Tool Helps With The Configuration Of Customised, Maintenance-Free Linear Drive Systems
Lead screw, gear rack or toothed belt drive? Miniature or heavy-load axle? Motor or hand wheel? Looking for the right linear module is time-consuming. This is exactly why igus GmbH has now developed the drive technology configurator.
Lenovo Infrastructure Solutions Group (ISG) to deliver an integrated, cost effective, virtualised edge computing solution with VMware. In addition, organisations can now plan their data center cloud and edge infrastructure solutions using Lenovo Open Cloud Automation management software.
Alps Alpine’s new ambient air sensor module monitors the surrounding environment with high-accuracy sensing of carbon dioxide (CO2), temperature, humidity, and other parameters.
Emerson introduces the new Copeland™ variable speed scroll compressor and inverter drive solution to deliver high energy efficiency and performance for commercial AC applications.
The digital sheet break solution provides a root cause analysis within one minute and acts as early warning system, not possible with current solutions.
Maxim Integrated’s Trinamic Servo Controller/Driver Module Accelerates Robotics and Automation Equipment
Trinamic Motion Control has introduced the smallest and lowest-power single-axis servo controller/driver module with integrated motion control.
Infineon And DIGISEQ Develop Secured Physical Asset Verification To Provide End-To-End Brand Protection
In a joint project, Infineon Technologies and DIGISEQ, utilise SECORA Blockchain NFC technology to deliver secured identity data.
esmo group has announced a partnership agreement with Kassow Robots to market, sell, and integrate the collaborative robots in Singapore.
Schaeffler and drive manufacturer Flender have joined forces to create a new, innovative and eco-friendly reusable packaging system.
New iMOTION SmartDriver Family IMD110 With Three-Phase Gate Driver Offers Integration And Flexibility
Infineon Technologies has introduced a new IMD110 SmartDriver series.
In February, Pilz launched the world’s first batch size 1 modular safety relay, myPNOZ.
With innovative technical upgrades, SIG have reduced water consumption up to 50 percent on new and already installed third generation filling machines.
Basler together with CCS has released the Basler Camera Light series which is ideally suited for the specific requirements of an image processing system.
Creaform has announced the latest release in its R-Series lineup, including the new MetraSCAN-R BLACK|Elite.
Helping to solve the specific power challenges of today’s unique industrial applications, ABB has expanded its line of proven CC-series conduction-cooled rectifiers.
Emerson has launched a new laser welder platform that provides high mix and batch manufacturers of plastic components with greater production capability
ADLINK has launched the new NEON-2000-JT2 AI-enabled smart camera series to make machine vision deployment for AI-based factory automation easier.
Modular Evaluation Platform For Discrete CoolSiC MOSFETs Allows Testing Of Different Driving Options
To facilitate the testing of drive options for the 1200 V CoolSiC MOSFET in TO247 3-pin and 4-pin packages, Infineon has introduced a modular evaluation platform.
Infineon Technologies AG continues to expand its comprehensive silicon carbide (SiC) product portfolio with 650 V devices.
Mouser: NXP’s i.MX 8QuadMax And 8QuadPlus Processors For Advanced Multi-Platform Automotive Infotainment
Mouser Electronics Incorporated is now offering the i.MX 8QuadMax and 8QuadPlus applications processors from NXP Semiconductors.
Infineon AURIX TC3xx Microcontroller Generation Delivers High-Performance For Automotive And Industrial Applications
Infineon’s TC3xx devices provide up to six independently operating 32-bit TriCore processor cores, as well as improved vehicle communications, data security, and functional safety.
ADLINK Technology has released the Industrial-Pi (I-Pi) SMARC (Smart Mobility ARChitecture) Development Kit, designed to provide engineers an industrial-ready prototyping platform.
End-of-arm tooling supplier OnRobot has launched a compact, single-pad version of its Gecko no-mark adhesive gripper.
You can precisely determine the FAULHABER drive system required for your projects with the particularly user-friendly FAULHABER Drive Selection Tool
Hioki is launching the Battery Cell Voltage Generator SS7081-50 in March 2020.
FAULHABER new metal GPT planetary gearhead family characterised by its compact dimensions, high torque and very fine graduations of the numerous gear ratios.
Datalogic’s new image-based bar code reader is designed for industry-leading levels of performance and flexibility for high-speed and DPM applications.
Red Lion Controls has released their innovative new NT328G Layer 3 Ethernet switch.
Mouser Electronics, Inc. is focused on the rapid introduction of new products and technologies, giving customers an edge and helping speed time to market.
Hioki is launching the Non-Contact CAN Sensor SP7001/SP7002 that can detect automotive CAN/CAN FD signals from outside wiring insulation.
Last month, Mouser launched more than 619 new products and technologies ready for same-day shipment.
Both the HMI panel and the visualisation for Schuler machines now have a uniform appearance.
KROHNE introduces the OPTIWAVE 1400 FMCW radar level transmitter for the water and wastewater industry.
Mouser Electronics Incorporated is now stocking the LMG1210 200 V half-bridge MOSFET and GaN FET driver from Texas Instruments (TI).
Schaeffler SpindleSense Reduces Machine Downtimes, Increases Utilisation Of Machine Capacity Majority can be traced back to defective spindles. Majority of machine tool downtimes can be traced back to defective spindles, particularly as a result of collisions and continuous, undetected overloads.
Maintenance-free igus bearing technology now easy to find with practical overview of materials, size selection and price list
Hioki launched the Electrode Resistance Measurement System RM2610.
ADLINK Technology has announced an upgrade to its MCM machine condition monitoring solution, with the launch of the DataConnect Pro Remote Facility Information Dashboard, integrating sensor management, data acquisition, edge platform, and vibration analysis, via dashboard-based operability.
Mouser Electronics Incorporated specialises in the rapid introduction of new products and technologies.
Softing Industrial has released version 1.20 of its Modbus to PROFIBUS gateways adding redundancy for critical process control applications and adding XML import for simplified integration into Schneider Electric engineering systems.
Mouser Electronics Incorporated is stocking the DS28E39 and DS28E84 DeepCover authenticators from Maxim Integrated.
The MAXXDRIVE industrial gear units from NORD provide high output torques from 15 to 240 kNm and are ideal for use in heavy duty applications.
The Allied Vision Alvium Camera Series is an innovative camera platform that addresses the limitations associated with current camera and sensor modules for embedded applications, and offers system designers a previously unknown level of freedom.
Ixia, a Keysight Technologies Incorporated Business, released the Vision Edge 1S (E1S) visibility solution. Ixia Vision Edge 1S offers network packet collection and performance monitoring in one affordable device.
Mouser Electronics Incorporated, the New Product Introduction (NPI) leader empowering innovation has stocked the i.MX 8M Mini applications processors from NXP Semiconductors.
Balluff is expanding their range of sensors—BFT media-contacting temperature sensors, for media-contacting temperature detection.
Industry 4.0 applications require complex interlinking and allow intelligent data analyses for increased efficiency. Schaeffler has fully integrated these new requirements and options into the new generation of its multi-channel condition monitoring system.
New Instrument eliminates the need for a dedicated sensor power supply while enabling power and efficiency measurement of two circuits.
Mouser Electronics Incorporated is stocking DACx1416 digital-to-analog converters (DACs) from Texas Instruments (TI). The DACx1416 are a pin-compatible…
Siemens offers new features in the firmware and hardware for the Sinamics S120 drive system. Operation is made much easier in firmware
The RSL 400 safety laser scanner not only ensures that automated guided vehicles (AGVs) are operated safely by means of protective and warning fields
Hioki launched AC Clamp Meter CM4141/CM4142, a pair of clamp AC current meters designed to make the instruments easier to clamp around wires.
FARO has announced the release of the advanced BuildIT 2019 software suite. BuildIT 2019 represents the logical evolution of the industry-proven…
Keysight Technologies Incorporated announced the availability of a new scalable 5G User Equipment (UE) accelerate innovation to connect and secure the world Emulation Solution from Ixia, a Keysight Business.
Keysight Technologies Launches Integrated Dual Channel 44 GHz Vector Signal Generator with 2 GHz Bandwidth
Keysight Technologies Incorporated, a leading technology company that helps enterprises, service providers and governments accelerate innovation to connect and secure the world launched the first dual-channel microwave signal generators that support up to 44 gigahertz (GHz) signals and 2 GHz radio frequency (RF) modulation bandwidth in a single instrument.
Keysight Technologies announces new 200 MHz, 4-channel oscilloscopes, providing professional-level measurements at affordable price.
Yokogawa has developed a cavitation detection system that helps to prevent equipment degradation and improves the efficiency of plant maintenance.
igus has developed a new CAN bus cable for highly dynamic energy chain applications, such as in machine tools.
The compact, electrically actuated SCHUNK VERO-S NSE-E mini 90 quick-change pallet module positions and clamps workpieces, components and pallets in less than one second at a repeat accuracy of < 0.005 mm. Due to 24V technology and optional clamping slide position monitoring, the fluid-free module is suitable for use in manufacturing environments as well as for applications in assembly processes, on measuring devices, or for 3D printing where parts require precise clamping.
SOFTING’S Gateway pnGate PA easily integrates PROFIBUS DP and PA segments directly into PROFINET control systems. It does not require an additional PROFIBUS DP intermediate segment. A user-friendly interface, easy integration into common engineering tools and the supported redundancy protocols address the requirements of process automation.
Tracer(SI) uses 3D CAD information to project 3D laser images onto a physical surface and provides a live, visually rich virtual template which assemblers can use to quickly position components with precision and complete confidence.
SINGAPORE: Grundfos has launched its new generation of CR pumps – which exceeds current energy efficiency limits for multi-stage in-line pumps. Grundfos’ renowned range of CR pumps are one of the world’s first vertical multistage centrifugal inline pumps, which line up pump pressure and pump suction port in a straight pipe. The centrifugal CR pumps can transport corrosive, hot, and high-pressure liquids used across various applications including water supply, water treatment and almost all industrial solutions.
Festo exhibited at SEMICON Southeast Asia 2018, the region’s premier gathering of the industry for connecting people, products, technologies and solutions across the global electronics manufacturing supply chain. The event was held on May 22 -24, 2018 at the new Malaysia International Trade and Exhibition Centre in Kuala Lumpur (MITEC).
As a sliding surface, the tribo-tape reduces abrasion during linear movements, allows easy sliding and reduces wear. The film is also already being used as edge protection and product protection by lining metal parts in packaging systems or conveyor systems. The iglidur tribo-tapes are tribologically optimised, which makes them extremely resistant to wear compared to standard materials.
HANNOVER/COLOGNE: In order to make automatic processes possible cost-effectively and individually, igus is developing low-cost solutions with the help of high-performance plastics such as the new modular motion system, robolink Apiro. Design engineers can choose from three lubrication-free worm gears for standard movement, inverted movement and linear movement.
The ZD420 and ZD620 thermal transfer desktop printers are enabled by Print DNA, a software suite of applications, utilities and developer tools. Print DNA is comprised of visibility, productivity, development and management tools that differentiate the enterprise capabilities of Zebra mobile, desktop and industrial printers. The software enables businesses to easily install and upgrade next-generation printers into existing network infrastructures, integrate new technologies, allow for cloud connectivity and provide a common, customizable platform for custom application solution development.
Ixia Enables VMware NSX Partners To Accelerate Testing, Reduce Certification Time From Months To Weeks
The solution uses Ixia’s IxNetwork to enable network equipment manufacturer partners to self-certify their products with VMware NSX in a range of network topologies, helping them save significant costs while improving time-to-market.
Hioki has launched the Battery HiTester BT3564, which is ideally suited for use in shipping and acceptance inspections of devices such as increasingly high-voltage battery packs for electric vehicles (EVs) and plug-in hybrid vehicles (PHEVs) as well as residential storage batteries. The instrument, which has a maximum input voltage of 1,000V, can simultaneously measure internal resistance and battery voltage.
Large frame, two laser system and high performance material meet the strict requirements for demanding polymer parts in the aerospace, electronics and mobility industries. EOS showcased its latest portfolio of industrial additive manufacturing (AM) solutions at RAPID + TCT 2018, hosted in Fort Worth, Texas, April 23-26. EOS launched the new EOS P 810 polymer platform specifically designed to process the new high-performance, ALM material HT-23. Developed in close cooperation with Boeing, this economic, high-temperature polymer AM solution addresses industry requirements for demanding high-performance parts. As such, this technology package is particularly developed for the aerospace industry but can also be applied for other industries.
With this network function, a single UM33A digital indicator can receive, process, and sequentially display data from up to eight sensors.
At the Hannover Messe, igus will be showing the new P4.1 roller chain for crane and gantry use with optional intelligent wear monitoring. In order to increase the uptime of crane systems and gantries, igus has now combined its core competencies in the areas of plain bearing technology and energy chains. In the P4.1 roller chain for long travels, newly developed tribologically optimised plain bearings ensure lubrication-free mounting of the individual chain links. This prolongs the service life of the energy chain. Optionally, the P4.1 e-chain can be part of the igus predictive maintenance concept with a new isense wear sensor.
Quarter turn actuator DFPD sets new standards in process automation.
Dell new platform family and software bundles enhance SD-WAN to speed Digital Transformation and expand opportunities for service providers, enterprises.
Southeast Asia: Honeywell has announced that Craig International Ballistics (CIB), a leading Australian manufacturer of combat-proven body armour systems, is using its Spectra Shield ballistic composite material in five new sets of removable armour for the Australian army’s CH-47F Chinook helicopters. These heavy-lift helicopters are designed to transport artillery, troops, ammunition, fuel and supplies within military theatres of operations. The armour will protect crew and passengers from small arms fire.
National Instruments (NI) has announced a sub-6 GHz 5G test reference solution compliant with the 3GPP Release 15 specification for 5G New Radio (NR). With commercial 5G NR deployments below 6 GHz on the horizon, engineers are actively developing sub-6 GHz 5G RF components and devices. The accelerated pace of 5G standardisation is driving intense pressure to bring products to market quickly. The company’s sub-6 GHz 5G NR reference solution is a cost-effective and high-performance option for test that helps engineers quickly characterise their designs and more easily transition from R&D to production test environments.
Ruckus Networks, a provider of wireless access networks, has released the Ruckus IoT Suite which enables organisations to readily construct a secure IoT access network that consolidates multiple physical-layer IoT networks into a single network. The IoT Suite improves time-to-return-on-investment and reduces deployment cost by allowing for the use of common infrastructure between the wireless local area network and the IoT access network.
Acconeer AB’s A1 SRD radar sensors are available for immediate shipment worldwide through Digi-Key Electronics, a global electronic components distributor, thanks to a new distribution agreement.
Mencom Introduces Industrial Wireless Access Point To Protect Sensitive Data On The Manufacturing Floors
The manufacturing industries and the utilities have been getting more automated, delocalised and more complex since the introduction of modern information technologies. The advanced smart grid system as an automated and distributed energy delivery network exemplifies how the complex network infrastructure works through connecting individual smart applications to operate traditional and modern renewable power plants together.
igus has presented a strain relief for e-chains. Cables and hoses are simply inserted into a honeycomb and then tightly closed. At the 2017 Motek the motion plastics specialist presented an advanced system to replace the earlier models. Compared to the commonly used cable tiewraps or other strain relief solutions, the user can save about 80 percent assembly and engineering time.
Minnesota, US: Communications and technology company Digi International has released the XBee3 series of next-generation radio frequency (RF) modules and cellular modems. The new micro form factor option is capable of supporting greater Internet of Things (IoT) innovation at the network edge. The new series extends its modular approach to IoT connectivity, enabling the integration of new functions as needs arise and regional requirements change.
Singapore: Software and hardware provider Keysight Technologies’ PathWave platform enables customers to accelerate innovation and product development from concept through manufacturing and deployment.
Siko’s AP20 position indicator is equipped to detect the position of spindle adjustments in machines. It displays the corresponding positional data to the operator and passes it on to the machine control system, requiring only simple system integration in combination with modern interfaces. This ensures the shortest possible downtimes; on the other the interfaces provide loss-free data communication between the position indicator and the machine control system.
With the module connect by igus, plug-in modules can be individually configured using the modular system.
igus, a manufacturer of plastic plain bearings, spherical bearings, linear guides, cable carriers and continuous-flex cables, has introduced its 3D-printed plastic grippers that enables manufacturers to save on costs and time.
Belden has released the latest version of its Hirschmann network management software. Industrial HiVision 7.1 improves functionality with the addition of new features for PoE detection and management, as well as added support for configuring emerging technologies like TSN. Strengthening the monitoring and management capabilities of previous versions, the result is improved availability and security for industrial networks.
Pump manufacturer Grundfos has launched a new generation Grundfos MGE motors – from 0.25 kW to 11 kW. Achieving the highest efficiency level available for electrical motors in the market today, these MGE IE5 motors will enable the company’s pumps to reach 10 percent in energy savings and 25 percent in payback time, as compared to the IE3 solution.
Thomson Industries, a manufacturer of mechanical motion control solutions, has extended the capability of its Electrak HD electromechanical linear actuator line to loads of up to 16 kilonewtons (kN) (3600 lbs). This new offering delivers heavy load handling capacity comparable to hydraulic technologies but with greater controllability, smaller footprint and low maintenance. The Electrak HD expansion also sets a new stroke length and durability performance benchmark for electromechanical actuators.
Houston, US: Honeywell Process Solutions (HPS) has announced the launch of its Honeywell Connected Plant Uniformance Cloud Historian.
Microsemi has teamed up with Digi-Key Electronics to provide the SmartFusion2 System-on-Chip (SoC) Field Programmable Gate Array (FPGA) maker board exclusively to Digi-Key’s global customer base.
B&R makes machine vision an integral element of the automation ecosystem. In 2017 SPS IPC Drives show, B&R introduced an image processing solution to be seamlessly incorporated in the automation system. The solution comprises cameras, software and lighting accessories.
Johnson Controls has introduced the York YZ Magnetic Bearing Centrifugal Chiller, the first chiller, the company claims, with a next-generation Low-Global Warming Potential (GWP) refrigerant—R-1233zd(E). Chosen for its efficiency, safety, availability, low environmental impact and cost, nonflammable R-1233zd(E) has an ultra-low GWP of 1 and is readily available from refrigerant manufacturers.
As more companies embrace Industry 4.0 to increase productivity and reduce costs, Grundfos has launched a range of new intelligent products under its iSolutions portfolio.
Transcend Information (Transcend), a manufacturer of embedded products, has introduced its patented Intelligent Power Shield (IPS) technology for DRAM and SSDs operating at 5V to ensure the integrity of data in the event of a sudden power outage. IPS function prolongs the time before the SSD enters write protection mode at the onset of power cut-off to ensure data integrity and to prevent the SSD from damage during sudden power failure or blackouts.
Johnson Controls has introduced a new, patented 270 deg six-way valve and actuator line that provides control in chilled beam and fan-coil installations.
Boge Kompressoren has become the first manufacturer in its field to offer lubricant in environmentally-friendly packaging, thanks to the launch of its ‘Lube Cube’, a greener alternative to traditional plastic containers.
Igus Front-Loader Test Rig In its own test laboratory, igus has now commissioned a new testing system for especially high loads such as in the agricultural or building machine industry.
The new Vehicle Radar Test System delivers object simulation and radar measurement capabilities for engineers testing autonomous driving technology.
EOS, a technology supplier in the field of industrial 3D printing of metals and polymers, has introduced its EOS P 500 system for Additive Manufacturing (AM) at formnext 2017. The system addresses companies who want to mass produce polymer parts on an industrial scale in combination with premium part quality.
The guidelite plus trough system from igus is now made of the new improved material igumid EG+. This ensures high chemical resistance so that the use of the cost-effective guide trough is ideal for electroplating and fertiliser production. Thanks to its ultra-light, modular design, the assembly is also greatly simplified.
The electrification of agricultural machinery and auxiliary components is becoming increasingly important also in the agricultural sector. As a result, Harting has for several years focused its efforts on the development of a standardised interface between tractor and attachment.
With high-speed measurement at 200 mS/s 10 times faster than the previous model and high-speed, real-time saving of measurement data that is 32 times faster than the previous model, the newly launched MR6000 stands ready to earn its keep as Hioki’s flagship model.
The comprehensive solution combines the Fujitsu SDN/NFV Consulting Service and Managed Network Service with the Silver Peak Unity EdgeConnectSP SD-WAN solution. Instead of spending months designing and implementing their own solution, the Fujitsu offering allows service providers to quickly deliver SD-WAN-as-a-Service to their enterprise customers.
Berson and Hanovia have jointly launched a new low-pressure UV disinfection system for the treatment of municipal, re-use and wastewater. The easy-to-install AmaLineR UV range has been third-party validated, in line with US EPA and NWRI guidelines. It provides effective treatment while reducing lifecycle costs by being simple to maintain and extremely energy efficient.
Kvaser AB has introduced the Kvaser Hybrid 2xCAN/LIN, a dual channel CAN/LIN interface that provides a single, flexible tool for accessing both CAN and Local Interconnect Network (LIN) busses.
For the smallest converter in its portfolio, the Sinamics V20, Siemens is now offering an extension module for the capture and output of digital and analogue signals.
A new Flexicon Bag Dump Station with explosion-proof electrical system contains dust emitted from manual dumping activities, compacts empty bags and conveys the material to an elevated destination.
The new generation of FAG HEATER devices are characterised by their safe heating operation and intuitive touchscreens. by Schaeffler
Bosch’s new 48-volt battery for hybrids is in demand by automakers across the globe. Similar to the Bosch e-axle, this 48-volt battery is standardised for easy integration into new vehicle models.
Faro has announced the availability of the Faro Visual Inspect product family. This platform enables large, complex 3D CAD (Computer-Aided Design) data to be transferred to an iPad and then used for mobile visualisation and comparison to real world conditions. This enables real time, actionable manufacturing insight through earlier stage error detection in the production, construction or design processes.
Coperion presented Version 5.0 of its RotorCheck contact monitoring system for rotary valves at Powtech 2017, which took place in Nuremberg, Germany from September 26-28, 2017. In production and processing operations, this system registers, evaluates and reports unwanted contact between the rotor and housing in order to be able to prevent metallic abrasion and thus potential contamination of the product being conveyed.
The sensor specialist Balluff has developed a new BTS infrared temperature sensor with IO-Link interface and two switching outputs.
With the extension of its testing product range to include Polymerase Chain Reaction (PCR)-based systems, Hygiena now covers the entire spectrum of reliable contamination detection, from sample collection to screening of indicator organisms to specific microbial characterisation. These products are suitable for large and small manufacturers of Fast-Moving Consumer Goods (FMCG), as well as large corporate laboratories and contract testing facilities serving the food and beverage sector.
Mencom’s Panel interface connector Series including new low profile housings, port adapters, and E45V3 connectors have been certified for compliance with both Canadian and US safety requirements by Underwriters Laboratories (UL), and the UL Listed mark now appears on the end products.
The new permanent-magnet synchronous motors without cooling fins achieve level IE4 / super premium efficiency. This can greatly benefit the food, beverage, and pharmaceutical industries, and other hygienically demanding applications. The efficient smooth-surface motors are suitable for use in dry areas as well as in applications requiring frequent cleaning.
Schaeffler’s new OriginCheck app gives end customers, distributors, and authorities the tools they need to quickly and easily carry out initial checks on INA and FAG products. If one of these checks leads the user to suspect that a product may be counterfeit, he or she can use the app to take additional measures to obtain proper clarification.
Faro has introduced the new Faro QuantumS FaroArm. The QuantumS is certified to ISO 10360 -12:2016, the most rigorous international measurement quality standard in existence. This global standard, unlike the various regional standards such as VDI/VDE 2617, establishes the consistent, critical testing procedures that enable objective performance comparisons across any and all Articulated Arm Coordinate Measuring devices.
The motion plastics specialist igus has now developed a unique strain relief system with a honeycomb structure for its energy supply systems.
Digi-Key Electronics, a full-service global distributor of electronic components, has announced Cirrus Logic’s Voice Capture Development Kit for Amazon AVS (598-2471-KIT-ND) is available for immediate shipment worldwide exclusively from Digi-Key.
Bossard has expanded its range of products portfolio of Hose Clamps, introducing a new exclusive branded partner – Oetiker.
Pepperl+Fuchs’ new Ethernet IO modules offer a number of innovative features.
Faro has introduced the new Faro QuantumS FaroArm. The QuantumS is certified to ISO 10360 -12:2016, the most rigorous international measurement quality standard in existence.
SigmaTEK Systems has released the latest version of their automated tube-cutting software, SigmaTUBE X1.
Thomson Industries has announced the availability of new synchronisation capabilities for its Electrak HD heavy duty electromechanical linear actuators.
B&R is providing a new function for crane control. Cranes that transport payloads suspended from sling systems can be particularly sensitive to rotation about the vertical axis. If left unchecked, this can lead to uncontrollable sustained oscillations.
ASG Technologies has announced Enterprise Data Intelligence 9.0. The solution’s new functionality solves a growing business challenge as organisations are increasingly tasked with allowing business users to access, prepare and analyse their own data.
The Yokogawa DL350 ScopeCorder is the most comprehensive fully portable measuring instrument available for capturing, displaying, recording and analysing. Like other models in the company’s ScopeCorder family, the DL350 combines features of a general-purpose oscilloscope and those of a high-performance data acquisition recorder in a single, portable instrument Yokogawa: Measuring Instrument.
With its Simatic PDM Maintenance Station V2.0, Siemens is providing a solution for efficient monitoring of intelligent field device statuses independently of the automation and control system used.
Faro has announced the availability of the Faro Zone 3D software. This platform, through its advanced smart tools, is the first of its kind to enable investigators to move fluidly between 2D and 3D environments and enhance the quality of incident reconstruction analysis or presentations for public safety professionals.
The GNExLD2 and STExLD2 LED beacons offer multiple flash modes with high and low power steady modes ensuring suitability for both warning and status indication.
Belden has released its new DataTuff Cat6A PROFINET cables, designed to support the growing demand for high-volume data transfer from the factory floor.
Creaform has announced that it will extend its expertise in Non-Destructive Testing (NDT) to the aerospace industry.
Grundfos Singapore has launched SCALA2, a fully integrated water booster pump. The SCALA2 os designed to provide perfect water pressure in all taps at all times – even with multiple taps and showers running at the same time.
Seeq Corporation has announced the availability of a Seeq connection module for Inductive Automation’s Ignition SCADA system.
Epicor Software Corporation, a provider of industry-specific enterprise software to promote business growth…
Hioki Measuring Instruments For RGB Lasers Hioki has announced the launch of three measuring instruments designed specifically for use with displays that utilise RGB lasers.
The motion plastics specialist igus takes a completely new approach to drive technology: the SLTI3 lead screw unit offers customers the highest degree of variability in the design of their individual linear axis.
igus expands its low-cost robot modular system and displayed applications from its own production at the Hannover Messe 2017
E2S Warning Signals are supporting its distributor Siegertech Engineering (M) Sdn. Bhd. on Stand 7093 at Oil and Gas Asia, 11 – 13 July 2017, Kuala Lumpur, Malaysia.
AMETEK Factory Automation has introduced an embedded Linear Displacement Transducer (LDT) with shock and vibration resistance for demanding mobile hydraulic applications.
National Instruments has announced LabVIEW NXG 1.0, the first release of the next generation of LabVIEW engineering system design software.
The 1630-2 FC Stakeless Earth Ground Clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw.
EOS presents EOSPRINT 2.0, the newest version of its Additive Manufacturing CAM environment.
Ametek VTI Instruments has announced that the introduction of its EMX-75XX Series of PXI Express (PXIe) Digital Input/Output (I/O) Modules, the latest addition to its Core Automated Test Equipment (Core ATETM) PXIe functional test solutions.
In order to minimise such unexpected downtimes and provide reliable connections, Mencom now offers a range of industrial Ethernet switches such as Managed Switches, Unmanaged Switches, Gigabit Switches, Harsh Environment Switches, and EN5015 Certified Switches.
Swiss technology company Paradox Engineering has announced PE Smart Urban Network, a next generation connectivity platform and applications ecosystem for Smart Cities.
BOGE Kompressoren, a supplier of compressed air systems is conducting a design study aimed at enhancing the overall convenience and attractiveness of screw compressors.
Print real-time ‘Best By,’ ‘Lot Code,’ ‘Sell by,’ ‘Expiration Codes’ and other identifying marks and codes to any substrate in the most extreme wet and high dust environments.
The new Allied Vision 1 product line is a full range of digital cameras designed for embedded vision applications but fulfilling the high standards of industrial and scientific image processing also referred to as ‘machine vision’.
IDEC Corporation has introduced a line of motion control stepper products in conjunction with Advanced Micro Controls Inc. (AMCI), an established developer of motion control systems.
The motion plastic specialist igus has developed the new chainflex medium voltage cable CFCRANE.PUR for very long travels, for example in crane facilities.
The new high-connectivity STM32L4 IoT Discovery kit (B-L475E-IOT01A) from STMicroelectronics is designed to give flexibility for developers building IoT (Internet of Things) nodes by supporting multiple low-power wireless standards and Wi-Fi, while integrating a complete collection of motion, gesture, and environmental sensors, unavailable on other kits in the market.
Hioki has announced the launch of the Non-Contact AC Voltage Probe SP3000. The product’s launch caps the company’s development and commercialisation of the world’s first no-metal-contact voltage measurement technology.
Binder has announced a new release in the miniature style connectors to include an M16 flange socket with square flange mounting.
Siemens has added Simatic HMI Comfort Panels PRO (PROtected) to its totally IP65 protected devices for operator control and monitoring.
The E4.1L from motion plastics specialist igus, the company claims, is the lightest cable-carrying e-chain on the market.
Transcend Information, a manufacturer of industrial-grade products, has announced the industrial-grade SuperMLC JetFlash 740 USB flash drive.
Infineon Technologies has added two power boards to the family of iMOTION Modular Application Design Kits (MADK). Infineon: Power Boards
Faro has announced the release of its next generation of Laser Trackers.
Carlo Gavazzi Automation has launched its new series of photoelectric sensors, the PD30CN PS with PointSpot. Carlo Gavazzi: Photoelectric Sensor
The new 11.6-inch widescreen display format from Beckhoff Automation offers increased scalability in the range of compact HMI devices.
With the M16 male panel mount connector with single wires Binder offers a product in the miniature area.
Panasonic has announced the launch of the Panasonic Toughpad FZ-N1. Its smallest Toughpad device to date, the 4.7-inch Panasonic.
SPX Flow’s APV SD4 Double Seal valves are designed for safe media separation applications. Their hygienic characteristics and long seal.
Carlo Gavazzi has developed the new generation of Parking Guidance System as an integral part of its Smart Building System based on the SBWEB BACnet Controller.
With the Fit Calculator the motion plastics specialist igus is now offering a new smartphone app for iOS and Android.
Belden has released the latest version of its Hirschmann network management software. Industrial HiVision 7.0 improves productivity by now allowing the simultaneous configuration of hundreds of devices from any manufacturer that are enabled with Simple Network Management Protocol (SNMP).
Rubber Tyred Gantry cranes are an essential part of port facilities around the world. With the d-rover, the motion plastics specialist igus provides a solution to supply data to these RTGs quickly and safely – for travels of over 800 metres.
The Pre-Configured IDF is specifically engineered to deploy and protect rackmount Ethernet switches in industrial applications.
Siemens is complementing its industrial operator control and monitoring devices with new Simatic Flat Panel monitors and Simatic Panel PCs in multi-touch, 16:9 widescreen format.
Igus has expanded its product range of support trays for secure and maintenance-free operation of unsupported e-chain applications.
These photoelectric sensors from Pepperl+Fuchs offer an economical choice and security through their innovative product design.
The motion plastics specialist igus has expanded its range of multi-axis energy chains and introduced a new size for the lightweight triflex TRLF. With 125 millimetres diameter, this is the largest in the range and can safely guide even more cables and hoses.
With the new AG24, Siko has expanded its portfolio of positioning drives with intelligent RTE (real-time Ethernet).
Hioki has announced the launch of a proprietary non-circuit breaker tripping digital multimeter design – Digital Multimeter DT4223 and DT4224.